Published 2023-01-03
license
Article

A IoT prototype design for the usable organic measurement waste in housing units

DOI: https://doi.org/10.22490/25394088.6505
José Luis Pua Castro Universidad Nacional Abierta y a Distancia
Sharee Valentina Zabala Calderón Universidad Nacional Abierta y a Distancia
Angel Alejandro Rodriguez Aya Universidad Nacional Abierta y a Distancia
Ramiro Hernan Polanco Universidad Nacional Abierta y a Distancia

This paper presents a beta prototype  measurement to usable organic generate in housing units waste. This document shows a Hardware and a Software prototipes apply to IoT. The prototype measurement was developed with an Arduino Nano Card and an ESP-01 that can mass measure in grams (g) and then sending the information at defined time intervals over a 2.4Ghz Wi-Fi network to the ThingSpeak platform. The preliminary results have errors under 1.4%, on the other hand it has a loss sending  percentage  information under than 2% between the prototype and ThingSpeak.

keywords: IoT, embedded system, Arduino
license

How to Cite

Pua Castro, J. L., Zabala Calderón, . S. V., Rodriguez Aya, A. A. ., & Polanco , R. H. . (2023). A IoT prototype design for the usable organic measurement waste in housing units. Publicaciones E Investigación, 16(4). https://doi.org/10.22490/25394088.6505
Almétricas

PRIVACY STATEMENT: In accordance with the Personal Data Protection Law (Law 1581 of 2012), the names and email addresses managed by Publicaciones e Investigación will be used exclusively for the purposes stated by this journal and will not be made available for any other purpose or to any other individual. Manuscripts submitted to the publication are only accessible to the editorial team and external peer reviewers. 

Design and implemented by