Influencia de la concentración de vidrio reciclado en las propiedades técnico-cerámicas de una formulación de pasta para la fabricación de baldosas

Yudi Ester  Ramírez Calderón; Sandra Patricia  Romero Nieto; Daniel Eduardo  Villalobos Correa; Diego Julián  Ruiz Quevedo

doi:10.22490/25394088.5613

Vol. 15 No. 4 (2021): Número Especial

Published 2021-12-15

license

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

When the Publicaciones e Investigaciones Journal receives an original study or article from its author(s), whether by email, postal service, or the platforms available for said purpose, know that it may be published in physical or electronic formats in national or international archives, databases, or SIRES. As such, Publications and Research authorizes the reproduction and citation of said material, provided that the description of information is carried out in conformity with bibliographic norms, and mention the corresponding names, authors, article, issue, and pages. Publications and Research, in advance, expresses that the information, concepts, and methods are the responsibility of the author(s). As such, the UNAD does not have any influence whatsoever over that expressed in the manuscript.

Article

Influence of the concentration of recycled glass on the technical-ceramic properties of a paste formulation for the manufacture of tiles

DOI: https://doi.org/10.22490/25394088.5613

Yudi Ester Ramírez Calderón

Sandra Patricia Romero Nieto

Daniel Eduardo Villalobos Correa

Diego Julián Ruiz Quevedo

PDF (Spanish)

Abstract
References

In industrial processes and human activities, a large amount of waste is generated, whose control or treatment is one of the most important problems today, mainly due to the limited availability of adequate places for its disposal, which generates a large accumulation of these and therefore contamination. In recent years, work has been carried out on the reuse of this waste, where its recycling and use in other sectors of the industry is contemplated.

The incorporation of industrial waste and recyclable materials has turned out to be an alternative of interest in the industry, which leads to a considerable reduction of the negative impact on the environment. Therefore, this project intends to carry out a study on the reuse of recycled glass, in order to determine possible applications as a raw material for the ceramic industry.

A physicochemical characterization will be carried out on these waste materials by means of different solid state techniques such as: X-ray fluorescence and X-ray diffraction, in order to determine their main characteristics and then incorporate them into the formulations of ceramic pastes and thus being able to analyze their behavior and influence on the technical-ceramic properties of the products obtained, which would make it possible to assess the potential for industrial use of these residues as raw material in the production of competitive ceramic materials.

keywords: waste, recyclable materials, environmental impact, ceramics

Al Hoseny, N. (2020). El dopaje Al3+reduce la recombinación de electrones/huecos en nanocristalitos de ferrita de cobre fotoluminiscente (CuFe2-xAlxO4). Boletín de la Sociedad Española de Cerámica y Vidrio.

Bragança, S., & Bergmann, C. (2005). Residuos de vidrio en porcelana. Materiales Research, 8, 39,44.

Buchner, S., Mikowski, A., Lepienski, C., Ferreira, E., Zanotto, E., Torres, R., & Soares, P. (2011). Propiedades mecánicas y tribológicas de una vitrocerámica sinterizada en comparación con el granito y el gres porcelánico. 271, 875- 880.

Cannillo, V., Mazza, D., Siligardi, C., & Sola, A. (2008). Vidrio dopado con cobalto para la fabricación de materiales de grado funcional de vidrio y alúmina percolados. Ceramics International, 34, 447-453.

Cardoso de Souza-Dal Bó, G., Bó, M., & Bernardin, A. (2021). Reutilización de residuos de vidrio laminado en la fabricación de fritas y esmaltes cerámicos. Materiales Química y Física, 257.

Chitwaree, S., Tiansuwan, J., Thavarungkul, N., & Punsukumtana, L. (2018). Ahorro energético en la sinterización de la fabricación de gres porcelánico mediante el uso de vidrio reciclado y piedra cerámica como materiales sustitutivos. Estudios de caso en Ingeniería Térmica, 11, 81- 88.

Conte, S., Zanelli, C., Molinari, C., Guarini, G., & Dondi, M. (2020). Residuos vítreos como sustitutos del feldespato en baldosas de gres porcelánico: comportamiento térmico y efecto en el proceso de sinterización. Materiales Química y Física, 256.

Das, S., Gautam, S., & Gautam, C. (2020). Optimización del coeficiente de desgaste y el coeficiente de fricción de las cerámicas de vidrio de borosilicato mediante la técnica de lógica difusa gris acoplada de Taguchi. Materiales de hoy: Actas, 27.

Delvasto Arjona, S., Guzmán Aponte, Á., Torres León, J., Cedeño Venté, M., & Acosta Guarín, D. (2013). Viabilidad de uso del polvo de vidrio como fundente en la elaboración de baldosas de gres porcelánico. Tecnura.

Ibáñez-Forés, V., Bovea, M., & Azapagic, A. (2013). Evaluación de la sostenibilidad de las mejores técnicas disponibles (MTD): metodología y aplicación en la industria de las baldosas cerámicas. Journal of Cleaner Production, 51, 162-176.

license

How to Cite

Ramírez Calderón, Y. E. ., Romero Nieto, . S. P. ., Villalobos Correa, D. E. ., & Ruiz Quevedo, . D. J. . (2021). Influence of the concentration of recycled glass on the technical-ceramic properties of a paste formulation for the manufacture of tiles. Publicaciones E Investigación, 15(4). https://doi.org/10.22490/25394088.5613

Download Citation

Almétricas