Diseño e implementación de un sistema termopar spider para el control de fluctuaciones de temperatura ambiente en la zona de extendería de la empresa vidrio andino

Nestor Javier Rodriguez Garcia; Albert Alexis  Roncancio Ospina; Iván Camilo  Nieto Sanchez

doi:10.22490/ECBTI.4341

Vol. 1 No. 2 (2020)

Published 2020-12-14

Artículos

Design and implementation of a thermopar spider system for the control of ambient temperature fluctuations in the extender area of the company vidrio andino

DOI: https://doi.org/10.22490/ECBTI.4341

Nestor Javier Rodriguez Garcia Universidad Nacional Abierta y a Distancia

Albert Alexis Roncancio Ospina

Iván Camilo Nieto Sanchez

PDF (Spanish)

Abstract
References

This document presents a prototype of a multipoint thermocouple with control of ambient temperature fluctuations within the Andino glass factory. This prototype, according to its appearance, was named “Spider Thermocouple” and has a wide measurement range between –200 ° C to 3000 ° C, which is used to characterize the temperature inside the company facilities. The proposed methodology is focused on the design and implementation of a test prototype and then on the Spider thermocouple, for the implementation of the thermocouple microcontrollers are used to detect temperature differences and perform the required control.

keywords: Temperature control, Junction, Spider Thermocouple

Ferdoush, S., & Li, X. (2014). Wireless sensor network system design using Raspberry Pi and Arduino for environmental monitoring applications. Procedia Computer Science, 34, 103-110.

Leccese, F., Cagnetti, M., & Trinca, D. (2014). A smart city application: A fully controlled street lighting isle based on Raspberry-Pi card, a ZigBee sensor network and WiMAX. Sensors, 14(12), 24408-24424.

Ibrahim, A. A. (2018, December). Carbon Dioxide and Carbon Monoxide Level Detector. In 2018 21st International Conference of Computer and Information Technology (ICCIT) (pp. 1-5). IEEE.

Tianlong, N. (2010). Application of Single Bus Sensor DHT11 in Temperature Humidity Measure and Control System [J]. Microcontrollers & Embedded Systems, 6, 026.

Gay, W. (2018). DHT11 sensor. In Advanced Raspberry Pi (pp. 399-418). Apress, Berkeley, CA.

WIKA. (2019). Instrumentos WIKA Colombia S.A.S. (A. Wiegand, Editor) Recuperado de WIKA Colombia: https://www.wika.co/tc95_es_es.WIKA

Fielding, R. T., & Kaiser, G. (1997). The Apache HTTP server project. IEEE Internet Computing, 1(4), 88-90.

Moreira, L. (2002). Medición de temperatura mediante termopar. Cerámica industrial , 7 (5), 51-53.

Naves, VTG, Luiz, NE, Machado, Á. R. y Dantas, NO (2006). Calibración de un sistema de termopar pieza-herramienta para medición de temperatura de mecanizado. 16º POSMEC - Simposio de Postgrado

license

How to Cite

Rodriguez Garcia, N. J., Roncancio Ospina, A. A. ., & Nieto Sanchez, I. C. . (2020). Design and implementation of a thermopar spider system for the control of ambient temperature fluctuations in the extender area of the company vidrio andino. Documentos De Trabajo ECBTI, 1(2). https://doi.org/10.22490/ECBTI.4341

Download Citation

Almétricas

No metrics available.

see details

Metrics

File downloads

255

| |