Published 2023-01-03
license
Article

A IoT prototype design for the usable organic measurement waste in housing units

DOI: https://doi.org/10.22490/25394088.6505

Authors

José Luis Pua Castro Universidad Nacional Abierta y a Distancia
Sharee Valentina Zabala Calderón Universidad Nacional Abierta y a Distancia
Angel Alejandro Rodriguez Aya Universidad Nacional Abierta y a Distancia
Ramiro Hernan Polanco Universidad Nacional Abierta y a Distancia

This paper presents a beta prototype  measurement to usable organic generate in housing units waste. This document shows a Hardware and a Software prototipes apply to IoT. The prototype measurement was developed with an Arduino Nano Card and an ESP-01 that can mass measure in grams (g) and then sending the information at defined time intervals over a 2.4Ghz Wi-Fi network to the ThingSpeak platform. The preliminary results have errors under 1.4%, on the other hand it has a loss sending  percentage  information under than 2% between the prototype and ThingSpeak.

keywords: IoT, embedded system, Arduino
license

How to Cite

Pua Castro, J. L., Zabala Calderón, S. V., Rodriguez Aya, A. A., & Polanco , R. H. (2023). A IoT prototype design for the usable organic measurement waste in housing units. Publicaciones E Investigación, 16(4). https://doi.org/10.22490/25394088.6505
Almétricas